There are lots of kinds of automotive and marine electrical connectors. A few of the common electrical connectors are butt connectors, ring terminals, spade terminals, and quick disconnect connectors.

Butt connectors are utilized to splice two wires together.

Ring terminals are used to connect the wire with a stud point being a screw for grounding or similar.

Spade terminals may be used like ring terminals however the nice benefit of the spade terminal or fork terminals could be that the stud does offered to hook up with it. The spade slide around the stud for any connection.

Quick disconnect connectors are employed to hook up to a tab and come in four tab sizes,.110 tab is 1/8 inch,.187 tab is 3/16 inch,.250 tab is 1/4 inch and.375 tab is 3/8 inch. You’ll find female and male quick disconnect connectors the feminine will slide on top of the male tab. Other electrical connectors include copper lug ring terminals, crimp caps, t tap connectors, plier tap connectors, hook terminals, and pin terminals.

Electrical connectors may be insulated or non insulated and come in a variety of varieties of insulation. The non insulated electrical connector is generally bare copper that features a tin plating. Insulated terminals come in PVC insulated, nylon insulated and heat shrink insulated. The PVC insulated type are usually the cheapest and quite a few common. PVC is usually a harder insulation and can crack when crimped and for this reason I would not recommend using them. Nylon insulation is really a softer insulation and will not crack in the event the terminal is crimped. The nylon insulation will likely withstand higher temperatures. I propose using nylon insulated terminals and connectors. Trailer Electrical Connectors insulated terminals and connectors are ideal for applications the location where the terminal is exposed to outside elements for example high temperatures, rain, snow, and underwater applications.

The heat shrink insulated terminals with adhesive lining create waterproof connections for the wire. Although heat shrink terminals can be expensive these are the best connectors to make use of considering that the last a long and rarely corrode.

When choosing electrical connectors it is best to use UL listed terminals and connectors to ensure that you are receiving quality connections. I suggest keeping away from terminals and connectors which might be produced in China due to low quality standards and cheap materials they normally use to really make the connectors. If you search the internet you will discover quality terminals and connectors at cheap pricing.

Contact:
Yeahui Technology Limited
Email: [email protected]

More info about Test Lead Kits website: this.