SA-3 cylinder shape burrs are perfect for interior contour work and deburring. Because of the extreme hardness on this tungsten carbide, it can be used on considerably more demanding jobs than HSS (High-Speed Steel).

Double cut or Cross cut carbide burrs are generally used on ferrous and non-ferrous metals, soft steel, as well as all non-metal materials such as stone, plastics, hard wood, and ceramic. Double cut burrs leaves a slightly smoother finish than single cut on account of producing smaller chips since they cut away the material. Use for medium stock removal, deburring, finishing, and cleaning. A double-cut carbide burr is regarded as the popular cut and will view you through most applications.

Machines Applied to:

Die Grinders and hand-held pneumatic grinders

Application:

Ferrous Materials – Iron, Steel, Stainless, Steel, Titanium, Nickel, Wrought Iron
Non-Ferrous Materials – Copper
Many other materials – Fiberglass, Plastic, Hard Rubber, Wood, Stone
Cylinder Shape burrs are ideal for interior contour work like peripheral and face milling.

Safety Tips & Techniques:

Tool speed is decided from the material you use your burr on. If you might be experiencing chipping, you’re operating at too high of speed for your application. Start with a slower speed while increasing as you go along before you achieve the best results

Apply light pressure and permit the tool perform the work. Bearing documented on the tool can lead to reduced tool life along with a dull burr.

Always wear proper PPE to include (although not tied to) safety glasses, hearing protection, respirator, and baseball gloves. Keep all guards in position on your own machine.

Avoid experience electrical power drills; the slower speeds can result in chipping of your workpiece.
To get more information about SA-3 Carbide Burrs go to the best resource