Knowing how to choose the best carbide burr for you personally can be quite a challenge. Have a look at have laid our helpful information for teach you the easiest way the proper carbide burr to your application.

The reason to use Diamond Cut Carbide Burrs?
Diamond cut burrs have a large numbers of small cutting edges which can make them perfect for use on any ‘hard’ material surface.
Use diamond cut burrs on metals including steel, metal and titanium
Diamonds cut burr ensures rapid, low vibration cutting
Perfect for eliminating machine marks

Why do you use Fluted Cut Carbide Burrs?
For usage on non ferrous metals, woods and plastics
Outside fluted cut face aids fast swarf removal on soft materials like aluminium and soft plastics

How do you identify the difference between Diamond Cut and Fluted Cut?
It is possible to differentiate backward and forward forms of carbide burrs.

Visually, the Fluted Cut carbide burrs use a more distinctive face with clear cuts about the burr. The Diamond Cut has more cutting area on the burr as it is used on hard metals.

When Must i Use my Carbide Burr?
There are numerous jobs that carbide burrs can be used as, just remember to assist the correct type!

Descaling some metal
Removing/stripping metal the location where the finish isn’t important
Removing machining marks
Adding detail to wood carvings (Fluted Cut)

Purchasing Carbide Burrs: Safety Procedures
Constantly improving your workplace commences with taking precautions to shield both yourself as well as the solid carbide burr. If you take the proper health concerns, you might prevent mishaps which entail both you and the instrument, in addition to damages to both. When precautions are taken, unfortunate events like accidents, diseases, and even deaths can be avoided, along with a host of other avoidable disasters.

Consider the following precautions before to and throughout the operation:

If you need to keep your solid carbide burr in good shape, guarantee the work materials are firmly fastened in a sturdy workstation. Additionally, you protect yourself from harm.
Make sure to see the burr shank you’re using has become properly put into the collet which the collet is securely clamped.
Position the carbide burr’s shank within the chuck of the air tool from the right orientation and be sure that it’s securely secured there.
When confronted with the material, the carbide burr doesn’t get caught on anything or become jammed. Due to this, the flutes dwindle sharp as time passes given that they chip away.
Keep the carbide burr moving and don’t enable your mind wander through the material you’re working on. Also, ensure that you wear protective equipment that covers your eyes, face, and hands.
Because towards the increased gravity from the carbide burr, more caution is necessary while coping with big materials.
Sometimes the carbide burr warms, which causes twilight and mist to appear. They could inflict severe damage if they were to be ingested, inhaled, or landed of the skin or eyes. Always proceed with extreme caution.
Places with proper ventilation should be employed for the project’s work.
To get more information about SC-3 Carbide Burrs have a look at our site