The carbide Burrs are primarily used in deburring, that is certainly removing burrs, sharp edges, and excessive materials along with grinding, shaping, and cutting of materials.

On this page, i will be taking a look at details of the tungsten carbide burrs that you need to know and the ways to utilize them.

Why don’t we get started!

1. Carbide Burrs can be utilized on a wide range of Materials

Tungsten carbide burrs is employed in a wide range of materials including various wood, plastics including the Glass fiber Reinforced Plastic (GRP), carbon fibre reinforced plastic (CRP), fiberglass, acrylics and metals including surefire, aluminum, and steel. Carbide burrs are perfect for soft metals for example silver, platinum, and gold while they use a long duration without any breaking or chipping. Metals include titanium, nickel, cobalt, zinc, and much more.

What are Carbide Burrs Utilized in?

Carbide burrs are normally used in air tools for example pneumatic rotary tools, die grinders and high-speed engravers. Others range from the hobby rotary tools, flexible shafts, pendant drills, and micro motors.

Uses of Carbide burrs

Generally, the carbide burrs find application in many of industries amongst that include the metal smith, dental, automotive, aerospace industries and much more. Of these industries they’re typically used for sculpting, cylinder head porting, grinding, deburring, casting, chamfering, welding, making jewelry, wood carving, model engineering, tool making, and also other metalwork.

2. Carbide Burrs are often accessible in Two Cuts; Single Cut and Double/Diamond Cut

Using the right-handed spiral flute, the cut carbide burrs, also referred to as normally the one flute, will remove material quickly which has a smooth finish. They may be basically used with ferrous metals, surefire, copper, hardened steel, and stainless steel. These are suitable for deburring, milling, as well as stock removal.

On the other hand, the double cut carbide burrs sometimes referred to as cross cut or diamond cut due to the 2 flutes cut across each other are usually used on all non-metal materials for example wood and plastics, ferrous and non-ferrous metals, soft steel and aluminum. The double cut carbide burrs produce smaller chips since they cut away the material hence leaves a smoother finish than the single cut.

3. Carbide Burrs Shapes

The cut or profile you want to achieve will help you make your choice of what shape of carbide burr to make use of. Here is a listing of the various carbide burr shapes:

· Carbide Ball Burrs

· Carbide Inverted Cone Burrs

· Carbide Tree Burrs

· Carbide Pointed Cone & Ball Nose or Carbide Round Nose Burrs

· Oval Burrs

· Cylinder Burrs. End/Ball nose/ Round Nose Cut

· Flame Burrs

· Countersink Burrs

· Oblate Spheroid

4. Do Not Apply A lot of Pressure

Little pressure should be applied. This really is in order to avoid chipping out of the cutting edges and lowering of the life from the burr.

5. At what speed (RPM) if the Carbide Burrs be used?

The contour is produced and the material being done determines the rate at which you employ your carbide burr placed in your rotary tool. However, the burr should be started slowly while helping the speed when you progress. The rate shouldn’t exceed 35,000 RPM.
To read more about SE-1 Carbide Burrs check out this web site